SHIFTPODIII.mini Spars
SHIFTPODIII.mini Spars
SHIFTPODIII.mini Spars

SHIFTPODIII.mini Spars

$19.99

Refer to the labeled diagram to ensure you select the correct size spar. The SHIFTPODIII.mini uses three different spar lengths depending on the location:

• ROOF SPAR – 40"
• UPPER WALL SPAR – 36"
• LOWER WALL SPAR – 50"

Note: Spar lengths may vary slightly (±0.25" to 0.75") due to manufacturing tolerances.

Each replacement spar comes fully assembled with a ferrule and spar cap—no need to purchase these parts separately.

Compatible Models

Please double-check your model and spar type before ordering. These replacement spars are only compatible with:

  • SHIFTPODIII.mini
  • SHIFTPODIII.mini+

These spars are not compatible with the original SHIFTPOD.mini, SHIFTPOD2.mini, full size SHIFTPODIII, or the SHIFTPODX line. 

Parts Return Policy

We accept returns within 30 days of purchase. Customers are responsible for shipping costs both ways, so please double-check your model and part selection before placing your order. When in doubt, reach out—our customer service team is here to help ensure you get the right part the first time. 

Email questions@shiftpod.com—we’re happy to help.

Repair Instructions

Replacing a Spar with SHIFTPOD Collapsed
 

1. Locate the Damaged Spar
With your SHIFTPOD fully collapsed (in the umbrella position), identify the broken or damaged spar.
 

2. Access the Hub
Unscrew the hub cover (the black, puck-shaped piece) where the damaged spar connects.

•Note: Some models include a retention ring beneath the hub cover—remove this if present.
 

3. Remove the Broken Spar
Carefully remove any broken spar pieces from the hub socket and the fabric corner pocket. If the spar broke near the ferrule, gently dislodge any stuck ferrule pieces from inside the hub.

⚠️ Wear gloves and handle with care—broken carbon fiber may have sharp or splintered edges.
 

4. Install the New Spar
Insert the spar cap end into the fabric corner pocket. Then, pop the ferrule end into the corresponding socket in the hub. Ensure both ends are fully seated and secure.
 

5. Reassemble the Hub
If your model has a retention ring, reinstall it. Then, screw the hub cover back on tightly.
 

6. Test the Repair
Fully pop up your SHIFTPOD and confirm the structure is stable.

CHOOSE SPAR LENGTH
Quantity
Title

HOW TO REPLACE A SPAR

Watch the video to guide you through the process of replacing a spar. See written instructions above

You May Also Like

FAQ

Delivery Information

Return & Exchange 

Contact Us
Title

Copyright © 2024 GemPages.